With the rapid development of our country, electroplating equipment in the production workshop has become an indispensable part of the industrial production in order to complete the process according to the requirements of electroplating, light power and plating tank is not enough, there must be some to ensure that plating Normal production of auxiliary equipment. Including cathode moving or stirring equipment, heating or cooling equipment, bath circulation or filtration equipment and plating tank essential accessories such as electrode rods, electrode wires, anodes and anode baskets, plating hooks and so on. It can be seen that auxiliary equipment plays an important role in industry.

1. cathode moving or stirring device

In the industrial processing, some plating is as long as the pussy or in the state of stirring swing, which can increase the working current, is the bath to play the greatest role, can prevent the tip, corner plating, charred and so on.

2. Cooling or heating equipment

As the plating solution needs to work at a certain temperature, so for the tank with a heating device. Such as plating bright nickel need to keep the bath temperature of 50 ℃, chrome required temperature is 50 ~ 60 ℃, and acid bright copper or bright silver plating and the temperature within 30 ℃. In this way, these processes require the use of heat exchange equipment to be met. For the general use of direct heating heating method.

3. Filtration and cycle filtration

In order to ensure the quality of plating, the bath needs to be regularly filtered. Some plating also requires the ability to cycle through the filter. Filtration machines are commonly used in the chemical industry and are therefore industry-standard equipment. According to the plating situation and the size of the plating tank and the need to select the filter.

4. Electroplating tank necessary accessories

Electroplating tanks must be equipped with accessories such as anode and anode basket or anode hook, electrode bar, power cable, etc., to put the anode sleeve. Some factories in order to save investment, no anode basket, with the hook directly to the anode hanging in the plating tank can also be.

5. hanging with

The hook is the most important auxiliary tool for electroplating. It is to ensure that the electroplating products and the cathode has a good connection tool, but also on the distribution of electroplating coating and work efficiency has a direct impact on the equipment, has an important role.