Electroplating equipment for a long time have to repair once, if not detected maintenance is easy to come up with this or that problem, the general plating equipment cleaning is divided into physical cleaning and chemical cleaning!

Cleaning range

In general, the use of mechanical or hydraulic means to remove the surface of the plating equipment, physical cleaning method, in addition, there are the use of heat, current, ultrasound and ultraviolet light and other methods for decontamination, so all use of thermal, mechanical, optical, electrical principle to remove the surface The dirt method should be classified as a physical cleaning range.

The use of chemicals or other aqueous solution to remove liquid surface dirt method called chemical cleaning. Common chemical cleaning with a variety of inorganic or organic acid to remove the metal surface rust, scale, with bleach oxidants to remove the surface of the stain, with fungicides, disinfectants to kill microorganisms and remove the surface of the object attached to the dirt or mildew The Features

The advantage of chemical cleaning is that many chemicals react quickly, the disadvantage is that chemical cleaning fluid is not properly selected, will cause corrosion of the substrate cleaning, resulting in loss.

Some chemicals are liquid, usually dubbed in aqueous solution. Because the liquid has good fluidity and strong penetration, it is easy to distribute evenly to all the cleaning surfaces. It is suitable for cleaning complex objects without cleaning. Of the "dead ends".

Chemical cleaning waste discharge is the cause of environmental pollution, so chemical cleaning must be equipped with wastewater treatment device, and other chemical treatment is not handled properly when the workers will be harmful to health hazards.

Physical cleaning, in many cases the use of dry cleaning, there is no problem of waste water treatment, even if the use of water scouring spray high pressure flushing, due to the discharge of water does not exist difficult to deal with chemical reagents, is also easier to handle.

In contrast, the physical cleaning of the environment pollution, the health of workers are less damage, and the physical cleaning of the cleaning body without corrosion damage.

The disadvantage of physical cleaning is in the complex structure of the internal cleaning equipment, the force sometimes can not even reach all parts of the "dead", and sometimes need to disassemble the equipment for cleaning, due to downtime caused by the loss. In order to improve the power of cleaning often need to be equipped with the corresponding power equipment, as well as the size of the large handling of the shortcomings of inconvenience.

Because of the physical cleaning and chemical cleaning have a good complementarity, so in the electroplating equipment production line is often the combination of the two to get a better cleaning effect.

For more information, please visit: Guangdong see is mechanical and electrical plating equipment Technology Co., Ltd.